Hello! Looking for some help troubleshooting my second Befaco DIY build,
The module only plays a sustained tone. As far as I can tell, triggers might be received, although they don't impact the sound as the sustained tone plays whenever the module is on. The bending, shaping, and tuning all work. I can't see any bridges in my soldering, and I've reflowed all the connections. What else can I try? I've attached pictures of my module below, as well as the schematic, and a link to a video of what's going on. Should I replace any capacitors in case they got scorched? All the trouble shooting I've done thus far has been unsuccessful, so anything is helpful!!
Much appreciated.
https://drive.google.com/file/d/1dkYYQT ... sp=sharing
The module only plays a sustained tone. As far as I can tell, triggers might be received, although they don't impact the sound as the sustained tone plays whenever the module is on. The bending, shaping, and tuning all work. I can't see any bridges in my soldering, and I've reflowed all the connections. What else can I try? I've attached pictures of my module below, as well as the schematic, and a link to a video of what's going on. Should I replace any capacitors in case they got scorched? All the trouble shooting I've done thus far has been unsuccessful, so anything is helpful!!
Much appreciated.
Statistics: Posted by clintlocked — Fri May 24, 2024 4:18 pm — Replies 0 — Views 18