.
New on modulargrid today -- these look fun to me.
.
.GIMME SOME WAVE TABLE
WIDTH: 18HP
CURRENT: +93mA,-45mA
Type of sounds possible: kick drum, snare drum, toms.
Type of utility possible: used as a wave table vco, lfo. Used as a percussion voice.
What does this do?
This is a complete synthesizer used to produce electronic percussion sounds. The core sound generator is digital, running Sheep Firmware. The sound generator is wave table based. This is very easy to use.
No menu diving.
The envelopes and output vca stage are analog.
You can connect an external electronic drum pad to trigger this module. You can also just use your modular system's trigger or gate signals. There is a handy manual trigger button also.
-middle key button selects among 3 wave table banks
-far right button selects: slow lfo mode, sub harmonic vco mode, or normal vco speed mode.
-far left button is a manual trigger.
The key cap mechanical buttons are better than my competitors illuminated travel buttons.
-two envelope decay generators. One for amplification, and one for pitch.
-two wave table scan parameter knobs
-toggle switch modulation selector, to send decay generators to 'drive' parameter. This creates a 'paper' sound. Similar to a snare drum head.
.Phrogs Analog Filter
Width: 16HP
Current: +65mA,-65mA
PCB Stack: 1 Level, Skiff compatible.
What does this do?
This is an analog filter with a separate 3 channel mono mixer, and VCA combo. There is also an internal envelope generator with Decay. All this product needs is a VCO and a trigger signal to complete a mini voice.
The outputs on the filter are meant to be manually patched into one of the VCA audio inputs on the module to complete the mini voice. You can mix and match to create custom filter types.
The Feedback on the product 'Rez', is what makes this sound like an MS20 filter. There are diodes, used as a limiter, and also to wave shape when in self oscillation mode.
Features:
-2 audio inputs with 2 level control knobs.
-Bi-polar FM for the filter.
-Mod input with level knob for the filter.
-FCV Filter CV direct input for the filter.
All CV inputs for the Filter are 1V per octave, Exponential.
-REZ CV
-VOLT CUT output. +5v/5v output. Used to remote control another filter, with the master 'Cut' knob.
-Internal Envelope Generator, with Level Sends to VCA and Filter.
-Separate VCA circuit, with 3 channel mono mixer input.
-1 CV input for the VCA. 'VCV'.
-1 VCA output.
The filter will self oscillate into a sine wave and does track 1v per octave.
New on modulargrid today -- these look fun to me.
.
.
WIDTH: 18HP
CURRENT: +93mA,-45mA
Type of sounds possible: kick drum, snare drum, toms.
Type of utility possible: used as a wave table vco, lfo. Used as a percussion voice.
What does this do?
This is a complete synthesizer used to produce electronic percussion sounds. The core sound generator is digital, running Sheep Firmware. The sound generator is wave table based. This is very easy to use.
No menu diving.
The envelopes and output vca stage are analog.
You can connect an external electronic drum pad to trigger this module. You can also just use your modular system's trigger or gate signals. There is a handy manual trigger button also.
-middle key button selects among 3 wave table banks
-far right button selects: slow lfo mode, sub harmonic vco mode, or normal vco speed mode.
-far left button is a manual trigger.
The key cap mechanical buttons are better than my competitors illuminated travel buttons.
-two envelope decay generators. One for amplification, and one for pitch.
-two wave table scan parameter knobs
-toggle switch modulation selector, to send decay generators to 'drive' parameter. This creates a 'paper' sound. Similar to a snare drum head.
.
Width: 16HP
Current: +65mA,-65mA
PCB Stack: 1 Level, Skiff compatible.
What does this do?
This is an analog filter with a separate 3 channel mono mixer, and VCA combo. There is also an internal envelope generator with Decay. All this product needs is a VCO and a trigger signal to complete a mini voice.
The outputs on the filter are meant to be manually patched into one of the VCA audio inputs on the module to complete the mini voice. You can mix and match to create custom filter types.
The Feedback on the product 'Rez', is what makes this sound like an MS20 filter. There are diodes, used as a limiter, and also to wave shape when in self oscillation mode.
Features:
-2 audio inputs with 2 level control knobs.
-Bi-polar FM for the filter.
-Mod input with level knob for the filter.
-FCV Filter CV direct input for the filter.
All CV inputs for the Filter are 1V per octave, Exponential.
-REZ CV
-VOLT CUT output. +5v/5v output. Used to remote control another filter, with the master 'Cut' knob.
-Internal Envelope Generator, with Level Sends to VCA and Filter.
-Separate VCA circuit, with 3 channel mono mixer input.
-1 CV input for the VCA. 'VCV'.
-1 VCA output.
The filter will self oscillate into a sine wave and does track 1v per octave.
Statistics: Posted by lfad — Wed Feb 05, 2025 1:03 pm — Replies 3 — Views 112