Hi all,
Fairly new to the modular community, but am a software engineer for a living and couldn't help but try and make some firmwares for the Versio platform.
I wanted to test a basic filter bank to see if I would even like having one in my case before committing to one as they are quite pricey, so decided to build a basic fixed filter bank as a fun exercise in practicing some C++.
https://drive.google.com/drive/folders/ ... drive_link
To flash a third party firmware, you'll have to follow a similar guide here: https://youtu.be/UaUJ3N8i57c?t=131
But obviously replacing the downloaded firmware with the one linked above. You may also have to figure out the right button combos as your Daisy seed may be laid out differently.
The controls are laid out as follows:![Image]()
Knobs 1-6 control the gain of each fixed filter channel
1 - Lowpass, 88 hz
2 through 5 - Bandpass, 250, 750, 1500, 3000 hz respectively
6 - Highpass, 7500 hz
Knob 7 controls the resonance of all channels at once. Be careful with this as it can drive the signal volumes quite high.
Switch ABC changes the slope of all the filters at once.
A: 6 dB/oct
B: 12 dB/oct
C: 24 dB/oct
Please let me know what you think! As usual this is more interesting when you modulate each separate filter channel for fun rhythmic and timbral changes.
I am also soliciting ideas for switch XYZ and the FSU button, please do share if you have any ideas you'd like to see.
Fairly new to the modular community, but am a software engineer for a living and couldn't help but try and make some firmwares for the Versio platform.
I wanted to test a basic filter bank to see if I would even like having one in my case before committing to one as they are quite pricey, so decided to build a basic fixed filter bank as a fun exercise in practicing some C++.
https://drive.google.com/drive/folders/ ... drive_link
To flash a third party firmware, you'll have to follow a similar guide here: https://youtu.be/UaUJ3N8i57c?t=131
But obviously replacing the downloaded firmware with the one linked above. You may also have to figure out the right button combos as your Daisy seed may be laid out differently.
The controls are laid out as follows:
Knobs 1-6 control the gain of each fixed filter channel
1 - Lowpass, 88 hz
2 through 5 - Bandpass, 250, 750, 1500, 3000 hz respectively
6 - Highpass, 7500 hz
Knob 7 controls the resonance of all channels at once. Be careful with this as it can drive the signal volumes quite high.
Switch ABC changes the slope of all the filters at once.
A: 6 dB/oct
B: 12 dB/oct
C: 24 dB/oct
Please let me know what you think! As usual this is more interesting when you modulate each separate filter channel for fun rhythmic and timbral changes.
I am also soliciting ideas for switch XYZ and the FSU button, please do share if you have any ideas you'd like to see.
Statistics: Posted by etcetc — Fri Nov 22, 2024 3:06 am — Replies 1 — Views 75