My 9u system went caput after being on for around 3 hours, and when I power up now only 3 modules seem to power on (odessa, zadar, and FH-2 which are all next to each other).
I'm using a 4ms Row Power 45 and am with the recommended spec (according to modulargrid), except for my +12v which is above the recommended 1500ma, but below the maximum 2000ma at 1790ma. The Row Power 45 was bought new 7 months ago and has been powering the same modules for the last couple months.
No burning smell when the system died but there was lots of weird malfunctioning on the digital modules before I quickly powered down.
I'm not all that clued up on power issues, is there any indication of what the problem could be if it's still powering up that small handful of modules and nothing else?
Here's the system for reference https://cdn.modulargrid.net/img/racks/m ... 632881.jpg
I'm using a 4ms Row Power 45 and am with the recommended spec (according to modulargrid), except for my +12v which is above the recommended 1500ma, but below the maximum 2000ma at 1790ma. The Row Power 45 was bought new 7 months ago and has been powering the same modules for the last couple months.
No burning smell when the system died but there was lots of weird malfunctioning on the digital modules before I quickly powered down.
I'm not all that clued up on power issues, is there any indication of what the problem could be if it's still powering up that small handful of modules and nothing else?
Here's the system for reference https://cdn.modulargrid.net/img/racks/m ... 632881.jpg
Statistics: Posted by bmjee — Sat Aug 24, 2024 3:37 pm — Replies 3 — Views 168