I purchased Mojave last month. It is an amazing module but it has terrible issues. At least from my experience.
My Mojave generates noise constantly from it's source. I have done the update, the microphone is closed, nothing plugged into the input and the terrible noise is auto generated. I can hear the grains of granular processing and some random sines-bells in the mids-highs frequencies. By changing the rate I can hear the noise and the grains following the rate signal. When I add it's reverb all the noise is added to the reverb... Whatever I put into the input signal is mixed with that noise and repeated in the granular processing. When I send it into my Starlab reverb or any other FX all are blended and the noise is getting bigger. The situation is terrible! I am trying all the time to find solutions and be creative, masking it somehow if I can.
Tried different slots in my rack, always the same. No problem with the other modules.
I went to the store where I bought it, checked another Mojave they had in the store and it makes the exact same noise! I've heard it on some random YouTube videos as well but not all of them. It's not extremely loud but it's always there and depending on the music you're working with it can be extremely noticeable and annoying or it can be masked and disappear in the sounds. I make ambient music, so in my case it's just a disaster.
I sent e-mail to Qu-bit, who said they would give me an answer to this problem. I have no answer from them. Is a 450Euros module... No cool from them. No Qu-bit again from me.
Here you can listen to the noise. I have turned up the volume. Turning the ''Rate'' and adding it's reverb at the end.ps. If anyone has similar issues with this module or if you know something about it please feel free to share your experience.
My Mojave generates noise constantly from it's source. I have done the update, the microphone is closed, nothing plugged into the input and the terrible noise is auto generated. I can hear the grains of granular processing and some random sines-bells in the mids-highs frequencies. By changing the rate I can hear the noise and the grains following the rate signal. When I add it's reverb all the noise is added to the reverb... Whatever I put into the input signal is mixed with that noise and repeated in the granular processing. When I send it into my Starlab reverb or any other FX all are blended and the noise is getting bigger. The situation is terrible! I am trying all the time to find solutions and be creative, masking it somehow if I can.
Tried different slots in my rack, always the same. No problem with the other modules.
I went to the store where I bought it, checked another Mojave they had in the store and it makes the exact same noise! I've heard it on some random YouTube videos as well but not all of them. It's not extremely loud but it's always there and depending on the music you're working with it can be extremely noticeable and annoying or it can be masked and disappear in the sounds. I make ambient music, so in my case it's just a disaster.
I sent e-mail to Qu-bit, who said they would give me an answer to this problem. I have no answer from them. Is a 450Euros module... No cool from them. No Qu-bit again from me.
Here you can listen to the noise. I have turned up the volume. Turning the ''Rate'' and adding it's reverb at the end.ps. If anyone has similar issues with this module or if you know something about it please feel free to share your experience.
Statistics: Posted by Dimitrios.Chas — Sun Jun 09, 2024 9:33 am — Replies 2 — Views 118